This converter may help if just the serial port on a personal computer is free, whereas the printer needs a parallel (Centronics) port. It converts a serial 2400 baud signal into a parallel signal.

The HV509 is a 200V, 16-channel serial to parallel converter. The high voltage outputs and the backplane driver are designed to source and sink ±1.0mA. The high voltage outputs are controlled by a ...

Designed to drive printers and LCDs, the HV610, a 32-channel, serial-to-parallel converter, provides high-voltage, push-pull outputs in the realm of +50V/-40V. The chip’s outputs can be individually ...

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works. Figure 1. 4:2:2 bit-serial digital distribution model. Click here to see an enlarged diagram. The ...

I'd probably get a USB to serial (RS-232) adapter and then stick a serial to parallel adapter on the end of it. Long time ago I bought a USB to parallel port adapter cable to use with an old HP laser ...

According to this KB article, if you want to use any of your old hard drives in a new G5 using a Serial to Parallel adapter, you're out of luck.<BR><BR>Now I am not getting a G5 anytime soon so this ...

The tactile device is thin, flexible, and has 25 stimulation generating points within a 2 cm × 2 cm area. To achieve wearable, to install the driving circuit close to the device, we use high voltage ...

We may receive a commission on purchases made from links. As technology has advanced, the types of ports on computers have also changed for the better. However, that doesn't mean devices with older ...

Reader EPooch needed a USB attached display for a future project. From initial research it seemed that most available solutions involved using a “usb to serial” adapter followed by a “serial to ...

New applications are driving the need for wideband data converters with increasingly higher sampling frequencies and data resolutions. This article explores how the new JESD204B standard overcomes ...